Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Networking - iDRAC - Reset Password ======

===== How To Reset the Dell iDRAC Password =====

You need physical direct access.

1) This varies by server model but the general process is to power on or reboot the server and press **F2** until you get into the BIOS/SETUP.

2) Navigate to the iDRAC Settings -

3) At this point you can either default everything which will restore the default **root/calvin** login information or you can go to **User Settings** and change the username and password.

<WRAP info>
**NOTE:**  Ensure that the user is set to **Enabled** and not **Disabled**.
</WRAP>

4) Save the settings, and click the **Finish** Button in iDRAC config; and then click on **Exit** to leave the BIOS and restart.

<WRAP info>
**NOTE:**  After this the new password should be active and enabled.
</WRAP>


----

===== Reset Password Did Not Work =====

You still cannot login to iDRAC.

Make sure you did Step #4 above

<code>
RAC0212: Login failed. Verify that username and password is correct.
</code>

<WRAP info>
**NOTE:**  If in doubt just reset to defaults and be sure the network settings are as you want them (eg. DHCP or Static).
</WRAP>